Personal tools
You are here: Home gvSIG Projects gvSIG Desktop Documentation User documentation gvSIG-Desktop 1.11. User manual (online)
gvSIG Desktop
gvSIG Desktop

Cached time 11/21/13 15:05:38 Clear cache and reload

 
Document Actions

gvSIG-Desktop 1.11. User manual

by Mario Carrera last modified 2013-07-30 16:04

procedimientos-para-entrada-de-ordenes-en.img/consolaComandosRecortada_en.png

The commands, options, messages or parameter requests the programme runs are shown in the area called "Command console".

The bottom line of the command console is called the "line command" and shows the action the application is running. The command console area size can be increased or decreased. To modify its size, place the mouse pointer on the separation bar between the command console and the graphic area, left click on the mouse and move the bar up or down until it is situated in the required position.

When you have finished, let go of the mouse button. You can also hide the command console by clicking on the down-facing triangle situated at the top right of the console. To show the command console, click on the upward-facing triangle.

To input commands into the command console using the keyboard, write the name of the command or order and press “Enter”. Commands can be input in capital or small letters. When a command is input, a window or a set of options associated with this command appears.

For example, if the “rectangle” command is input, a window will appear in which the definition of a corner point is requested. When the point has been inserted, a second point or “C” is requested to indicate that the object will be a square.

procedimientos-para-entrada-de-ordenes-en.img/rectanguloEnConsola_en.png

Cached time 11/21/13 06:56:34 Clear cache and reload

Get freemind document

View source document Get permanent link


Powered by Plone CMS, the Open Source Content Management System

This site conforms to the following standards: